Description
Material | Modulus of elasticity | ![]() |
|
---|---|---|---|
Poisson’s ratio | ![]() |
||
Density | ![]() ![]() |
||
Geometry | Cross-section | Thickness | ![]() |
Boundary conditions | At bottom edge | ![]() |
|
In point A | ![]() |
||
In point B | ![]() |
||
Loads | Self-weight1 | ![]() |
|
Mesh | Maximum element size | ![]() |
|
Minimum element size | ![]() |
![Rendered by QuickLaTeX.com g](https://support.buildsoft.eu/wp-content/ql-cache/quicklatex.com-d208fd391fa57c168dc0f151de829fee_l3.png)
![Rendered by QuickLaTeX.com 9.81m/s^2](https://support.buildsoft.eu/wp-content/ql-cache/quicklatex.com-5b200e4e40241d914acab30859b9b58e_l3.png)
![Rendered by QuickLaTeX.com g=10.0m/s^2](https://support.buildsoft.eu/wp-content/ql-cache/quicklatex.com-f073cdd1fbde60ecee79e6815d07ced7_l3.png)
Indepent reference results
Diamonds results and comparison
Deformation in Diamonds
Point | Which result | Independent reference | Diamonds | Difference |
---|---|---|---|---|
Y=2m | stress ![]() |
0,157N/mm² | 0,157N/mm² | 0,00% |
Y=0 | Longitudinal deformation ![]() |
0,002990mm | 0,002991mm | 0,02% |
Y=0 | Radial deformation ![]() ![]() |
0,000449mm | 0,000442mm | -1,46% |
References
- Mécaniciens, S. F. D. (1990). Guide de validation des progiciels de calcul des structures: SSLS 09: cylindre mince sous son poids propre
- Roark, R. J., & Young, W. C. (2002). Roark’s Formulas for Stress and Strain (7th edition, Table 13.1 case 1e). McGraw-Hill Companies.
- Tested in Diamonds 2024r01.