Description
Material | Modulus of elasticity | ![]() |
|
---|---|---|---|
Poisson’s ratio | ![]() |
||
Geometry | Cross-section | Thickness | ![]() |
Boundary conditions | At bottom edge | ![]() |
|
Loads | On top edge | ![]() |
|
Mesh | Maximum element size | ![]() |
|
Minimum element size | ![]() |
Indepent reference results
Diamonds results and comparison
Deformation in Diamonds
Point | Which result | Independent reference | Diamonds | Difference |
---|---|---|---|---|
mid | stress ![]() |
0,5N/mm² | 0,5N/mm² | 0,00% |
max | Longitudinal deformation ![]() |
0,009524mm | 0,009525mm | 0,01% |
max | Radial deformation ![]() ![]() |
0,000714mm | 0,000750mm | 5,00% |
References
- Mécaniciens, S. F. D. (1990). Guide de validation des progiciels de calcul des structures: SSLS 07: cylindre mince sous charge axiale uniforme.
- Roark, R. J., & Young, W. C. (2002). Roark’s Formulas for Stress and Strain (7th edition, Table 13.1 case 1a). McGraw-Hill Companies.
- Tested in Diamonds 2024r01.