{"id":8579,"date":"2023-02-27T16:08:13","date_gmt":"2023-02-27T16:08:13","guid":{"rendered":"https:\/\/support.buildsoft.eu\/?post_type=ht_kb&#038;p=8579"},"modified":"2023-02-27T16:09:08","modified_gmt":"2023-02-27T16:09:08","slug":"stirrups-concrete-plus","status":"publish","type":"ht_kb","link":"https:\/\/support.buildsoft.eu\/es\/knowledge-base\/stirrups-concrete-plus\/","title":{"rendered":"Stirrups (ConCrete Plus)"},"content":{"rendered":"<div class=\"su-tabs su-tabs-style-default su-tabs-mobile-stack\" data-active=\"1\" data-scroll-offset=\"0\" data-anchor-in-url=\"no\"><div class=\"su-tabs-nav\"><span class=\"\" data-anchor=\"EN\" data-url=\"\" data-target=\"\" tabindex=\"0\" role=\"button\">EN<\/span><span class=\"\" data-anchor=\"NL\" data-url=\"\" data-target=\"\" tabindex=\"0\" role=\"button\">NL<\/span><span class=\"\" data-anchor=\"FR\" data-url=\"\" data-target=\"\" tabindex=\"0\" role=\"button\">FR<\/span><\/div><div class=\"su-tabs-panes\"><div class=\"su-tabs-pane su-u-clearfix su-u-trim\" data-title=\"EN\">\n<p>If you want to change the information of the stirrups in longitudinal view, select the menu \u00ab<strong>Lay-out<\/strong>\u00bb \u2013 \u00ab<strong>Comments<\/strong>\u00bb \u2013 \u00ab<strong>Stirrups\u2026<\/strong>\u00ab. The following dialog box now appears on the screen:<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"size-full wp-image-8580 aligncenter\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28ENCP.png\" alt=\"\" width=\"563\" height=\"392\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28ENCP.png 563w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28ENCP-300x209.png 300w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28ENCP-50x35.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28ENCP-60x42.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28ENCP-35x24.png 35w\" sizes=\"(max-width: 563px) 100vw, 563px\" \/><\/p>\n<ul>\n<li>With <img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-full wp-image-8583\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aENCP.png\" alt=\"\" width=\"304\" height=\"20\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aENCP.png 304w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aENCP-300x20.png 300w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aENCP-50x3.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aENCP-60x4.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aENCP-35x2.png 35w\" sizes=\"(max-width: 304px) 100vw, 304px\" \/>, you can indicate if the stirrups should be drawn in the longitudinal view.<\/li>\n<li>With <img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-large wp-image-8587\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bENCP.png\" alt=\"\" width=\"151\" height=\"25\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bENCP.png 151w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bENCP-150x25.png 150w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bENCP-50x8.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bENCP-60x10.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bENCP-35x6.png 35w\" sizes=\"(max-width: 151px) 100vw, 151px\" \/>, you can indicate how many stirrups should be drawn per zone. You can choose between:\n<ul>\n<li>drawing all stirrups<\/li>\n<li>drawing 1 stirrup per zone (in the middle of the zone)<\/li>\n<li>drawing 2 stirrups per zone (one at the beginning and one at the end of each zone) drawing 3 stirrups per zone (one at the beginning, one in the middle and one at the end of each zone)<\/li>\n<\/ul>\n<\/li>\n<li>Using the four radio buttons <img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-large wp-image-8586\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP.png\" alt=\"\" width=\"85\" height=\"98\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP.png 85w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-43x50.png 43w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-52x60.png 52w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-30x35.png 30w\" sizes=\"(max-width: 85px) 100vw, 85px\" \/>you can select the line to which you want to give information.\n<ul>\n<li>The <strong>theoretical distance<\/strong> is the distance between the stirrups as it was calculated by ConCrete, in other words: without taking into account whether the total distance is a multiple of the distances.<br \/>\nThe <strong>real distance<\/strong> is the distance is obtained by dividing the length along which the theoretical distance is valid, by the number of stirrups.<\/li>\n<li>The different possibilities for this information are indicated on the right. You change the information on the indicated line by selecting another radio button. For the explanation of \u00ab[Form text]\u00bb see<a href=\"https:\/\/support.buildsoft.eu\/knowledge-base\/form-text-concrete-plus\/\">\u00a0this article.<br \/>\n<\/a>With the last but one radio button we can let the program draw vertical lines on the desired line, at the place of the horizontal position of the stirrups.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p>In the edit field at the left bottom side, we can enter an alternative for \u201ceach\u201d.<\/p>\n<p>With the button \u00ab<strong>Store<\/strong>\u00bb\u00a0you can save the current input as default. With the button\u00a0\u00ab<strong>Retrieve<\/strong>\u00bb\u00a0you can replace the current content of the dialog with the default values.\u00a0\u2013<\/p>\n<\/div>\n<div class=\"su-tabs-pane su-u-clearfix su-u-trim\" data-title=\"NL\">\n<p>Om de informatie bij de beugels in het langsaanzicht te veranderen ga naar het menu \u201c<strong>Layout<\/strong>\u201d \u2013\u00bb<strong>Tekst &amp; uitleg<\/strong>\u00bb \u2013 \u00ab<strong>Beugels\u2026<\/strong>\u00ab. Op het scherm verschijnt onderstaand dialoogvenster:<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"size-large wp-image-8582 aligncenter\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28NLCP.png\" alt=\"\" width=\"535\" height=\"392\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28NLCP.png 535w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28NLCP-300x220.png 300w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28NLCP-50x37.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28NLCP-60x44.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28NLCP-35x26.png 35w\" sizes=\"(max-width: 535px) 100vw, 535px\" \/><\/p>\n<ul>\n<li>De optie\u00a0<img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-large wp-image-8589\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aNLCP.png\" alt=\"\" width=\"212\" height=\"22\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aNLCP.png 212w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aNLCP-50x5.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aNLCP-60x6.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aNLCP-35x4.png 35w\" sizes=\"(max-width: 212px) 100vw, 212px\" \/> laat toe de beugels al dan niet uit te tekenen in het langsaanzicht.<\/li>\n<li>D.m.v. het pulldown-menu <img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-large wp-image-8588\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bNLCP.png\" alt=\"\" width=\"151\" height=\"25\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bNLCP.png 151w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bNLCP-150x25.png 150w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bNLCP-50x8.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bNLCP-60x10.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bNLCP-35x6.png 35w\" sizes=\"(max-width: 151px) 100vw, 151px\" \/>kan u aangeven hoeveel beugels er per beugelzone dienen getekend te worden. U hebt de keuze tussen:\n<ul>\n<li>alle beugels tekenen<\/li>\n<li>1 per zone (in het midden van de zone)<\/li>\n<li>2 per zone (\u00e9\u00e9n aan het begin, \u00e9\u00e9n aan het einde van de zone)<\/li>\n<li>3 per zone (\u00e9\u00e9n aan het begin, \u00e9\u00e9n aan het einde en \u00e9\u00e9n in het midden)<\/li>\n<\/ul>\n<\/li>\n<li>Links kan u met behulp van vier keuzeknoppen <img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-large wp-image-8586\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP.png\" alt=\"\" width=\"85\" height=\"98\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP.png 85w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-43x50.png 43w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-52x60.png 52w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-30x35.png 30w\" sizes=\"(max-width: 85px) 100vw, 85px\" \/>aanduiden op welke lijn (t.o.v. de bematingslijn) welke informatie moet getoond worden.\n<ul>\n<li>De <strong>theoretische tussenafstand <\/strong>is de afstand tussen de beugels zoals die werd berekend door ConCrete, dus zonder rekening te houden of de totale afstand wel een veelvoud is van de tussenafstanden.<br \/>\nDe <strong>werkelijke tussenafstand <\/strong>is de afstand die bekomen wordt door de lengte waarover de theoretische tussenafstand geldig is, te delen door het aantal beugels.<\/li>\n<li>De verschillende mogelijkheden voor deze informatie worden opgelijst aan de rechter kant. Zie \u00a74.6 voor de verklaring van \u00ab[vormtekst]\u00bb.<br \/>\nDoor van keuzeknop te veranderen, wijzigt de informatie op de aangeduide lijn. Met de voorlaatste optie kunnen op de gewenste lijn verticale lijnen getekend worden ter plaatse van de horizontale positie van de beugels.<\/li>\n<\/ul>\n<\/li>\n<li>In het invulveld linksonder kan een alternatief ingevuld worden voor \u201c<strong>alle<\/strong>\u201d.<\/li>\n<\/ul>\n<p>De betekenis van de knoppen \u00ab<strong>OK<\/strong>\u00ab, \u201c<strong>Stockeer<\/strong>\u201d, \u201c<strong>Haal op<\/strong>\u201d en \u00ab<strong>Annuleer<\/strong>\u00bb is analoog aan deze in ConCrete.<\/p>\n<ul>\n<li>Actuele instellingen worden bevestigd door de knop \u201c<strong>OK<\/strong>\u00bb te klikken.<\/li>\n<li>Ze kunnen als standaardinstellingen worden ingesteld door de knop \u00ab<strong>Stockeer<\/strong>\u00bb te klikken.<\/li>\n<li>Wijken de actuele instellingen af van de standaardinstellingen, dan kunnen ze opnieuw worden gelijkgesteld aan de standaardinstellingen door de knop \u00ab<strong>Haal op<\/strong>\u00bb te klikken.<\/li>\n<li>De knop \u00ab<strong>Annuleer<\/strong>\u00bb wijzigt de actuele instellingen niet.<\/li>\n<\/ul>\n<p>Wanneer het programma be\u00ebindigd wordt, worden de standaardinstellingen bewaard. Bij het opstarten van het programma, worden de standaardinstellingen opgehaald en worden meteen de actuele instellingen.<\/p>\n<\/div>\n<div class=\"su-tabs-pane su-u-clearfix su-u-trim\" data-title=\"FR\">\n<p>Si vous souhaitez modifier les informations relatives aux \u00e9triers de la vue longitudinale, s\u00e9lectionnez la commande \u00ab<strong>Format<\/strong>\u00bb \u2013 \u00ab<strong>Annotations<\/strong>\u00bb \u2013 \u00ab<strong>Etriers<\/strong>\u00ab. La fen\u00eatre de dialogue illustr\u00e9e appara\u00eet alors \u00e0 l\u2019\u00e9cran :<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" class=\"size-large wp-image-8581 aligncenter\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28FRCP.png\" alt=\"\" width=\"543\" height=\"392\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28FRCP.png 543w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28FRCP-300x217.png 300w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28FRCP-50x36.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28FRCP-60x43.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28FRCP-35x25.png 35w\" sizes=\"(max-width: 543px) 100vw, 543px\" \/><\/p>\n<ul>\n<li>Un bouton \u00e0 cocher\u00a0<img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-large wp-image-8585\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aFRCP.png\" alt=\"\" width=\"254\" height=\"25\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aFRCP.png 254w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aFRCP-50x5.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aFRCP-60x6.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28aFRCP-35x3.png 35w\" sizes=\"(max-width: 254px) 100vw, 254px\" \/> vous permet d&#8217;indiquer si vous souhaitez voir dessiner les \u00e9triers dans la vue longitudinale.<\/li>\n<li>Dans le menu d\u00e9roulant <img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-large wp-image-8584\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bFRCP.png\" alt=\"\" width=\"143\" height=\"19\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bFRCP.png 143w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bFRCP-50x7.png 50w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bFRCP-60x8.png 60w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28bFRCP-35x5.png 35w\" sizes=\"(max-width: 143px) 100vw, 143px\" \/>vous sp\u00e9cifiez le nombre d\u2019\u00e9triers ConCrete Plus doit dessiner. Vous avez le choix entre :\n<ul>\n<li>dessiner tous les \u00e9triers<\/li>\n<li>1 par zone (au milieu de la zone)<\/li>\n<li>2 par zone (un au d\u00e9but, un \u00e0 la fin de la zone)<\/li>\n<li>3 par zone (un au d\u00e9but, un au milieu et un \u00e0 la fin de la zone)<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<ul>\n<li>Dans le carr\u00e9 sup\u00e9rieur gauche, vous pouvez indiquer, \u00e0 l&#8217;aide des quatre boutons d&#8217;option\u00a0<img decoding=\"async\" loading=\"lazy\" class=\"img_inline alignnone size-large wp-image-8586\" src=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP.png\" alt=\"\" width=\"85\" height=\"98\" srcset=\"https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP.png 85w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-43x50.png 43w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-52x60.png 52w, https:\/\/support.buildsoft.eu\/wp-content\/uploads\/2023\/02\/Figuur28cCP-30x35.png 30w\" sizes=\"(max-width: 85px) 100vw, 85px\" \/> , la ligne de cote (par rapport \u00e0 la ligne de cotation) sur laquelle vous souhaitez sp\u00e9cifier des informations.\n<ul>\n<li>Les diff\u00e9rentes possibilit\u00e9s pour ses informations sont affich\u00e9es dans le grand rectangle de droite. Un changement de bouton d&#8217;option modifie l&#8217;information sur la ligne indiqu\u00e9e. Pour la d\u00e9finition de \u00ab[texte de forme]\u00bb, veuillez voir point 4.6<\/li>\n<li>Par \u00e9cartement th\u00e9orique, on entend la distance s\u00e9parant les \u00e9triers, telle que calcul\u00e9e par ConCrete, c.-\u00e0-d. sans se pr\u00e9occuper de savoir si la distance totale est effectivement un multiple des \u00e9cartements. L&#8217;\u00e9cartement r\u00e9el est l&#8217;\u00e9cartement obtenu en divisant la longueur sur laquelle l&#8217;\u00e9cartement th\u00e9orique est valable, par le nombre d&#8217;\u00e9triers.<\/li>\n<li>A l&#8217;aide de l&#8217;avant-dernier bouton d&#8217;option, vous pouvez dessiner des lignes verticales sur la ligne de cote souhait\u00e9e, de mani\u00e8re \u00e0 indiquer la position horizontale des \u00e9triers.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p>La signification des boutons \u00ab<strong>OK<\/strong>\u00ab, \u00ab<strong>Sauver<\/strong>\u00ab, \u00ab<strong>Appeler<\/strong>\u00bb et \u00ab<strong>Annuler<\/strong>\u00bb est identique \u00e0 celle des boutons de ConCrete.<\/p>\n<ul>\n<li>Les param\u00e8tres sp\u00e9cifi\u00e9s sont confirm\u00e9s comme param\u00e8tres actuels en cliquant sur le bouton \u00ab<strong>OK<\/strong>\u00ab.<\/li>\n<li>Ils peuvent \u00eatre sp\u00e9cifi\u00e9s en tant que param\u00e8tres standard en cliquant sur le bouton \u00ab<strong>Sauver<\/strong>\u00ab.<\/li>\n<li>Si les param\u00e8tres actuels s&#8217;\u00e9cartent des param\u00e8tres standard, ils peuvent \u00eatre \u00e0 nouveau assimil\u00e9s aux param\u00e8tres standard en cliquant sur le bouton \u00ab<strong>Appeler<\/strong>\u00ab.<\/li>\n<li>Le bouton \u00ab<strong>Annuler<\/strong>\u00bb permet de ne pas modifier les param\u00e8tres actuels.<\/li>\n<\/ul>\n<p>Lorsque vous quittez le programme, les param\u00e8tres standard sont enregistr\u00e9s. Lors du d\u00e9marrage du programme, les param\u00e8tres standard sont appel\u00e9s et deviennent imm\u00e9diatement les param\u00e8tres actuels.<\/p>\n<\/div><\/div><\/div>\n    \t\t<div class=\"hts-messages hts-messages--info   hts-messages--withicon \" id=\"\" style=\"\">\r\n    \t\t\t    \t\t\t    \t\t\t\t<p>\r\n    \t\t\t\t\tYou can consult the entire Concrete Plus manual\u00a0<a href=\"http:\/\/downloads.buildsoft.eu\/pdf\/en\/User%20Manual%20ConCrete%20Plus.pdf\" target=\"_blank\" rel=\"noopener noreferrer\">here<\/a>.<\/p>\n<p>De volledige ConCrete Plus\u00a0handleiding kan u\u00a0<a href=\"http:\/\/downloads.buildsoft.eu\/pdf\/nl\/Handleiding%20ConCrete%20Plus.pdf\" target=\"_blank\" rel=\"noopener noreferrer\">hier\u00a0<\/a>vinden.<\/p>\n<p>Le manuel complet de ConCrete\u00a0Plus peut \u00eatre trouv\u00e9\u00a0<a href=\"http:\/\/downloads.buildsoft.eu\/pdf\/fr\/Manuel%20ConCrete%20Plus.pdf\" target=\"_blank\" rel=\"noopener noreferrer\">ici<\/a>.<\/p>\n    \t\t\t\t<\/p>\r\n    \t\t\t    \t\t\t\r\n    \t\t<\/div><!-- \/.ht-shortcodes-messages -->\r\n    \t\t\n\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":3,"comment_status":"closed","ping_status":"closed","template":"","format":"standard","meta":[],"ht-kb-category":[1025],"ht-kb-tag":[],"_links":{"self":[{"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/ht-kb\/8579"}],"collection":[{"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/ht-kb"}],"about":[{"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/types\/ht_kb"}],"author":[{"embeddable":true,"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/comments?post=8579"}],"version-history":[{"count":2,"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/ht-kb\/8579\/revisions"}],"predecessor-version":[{"id":8591,"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/ht-kb\/8579\/revisions\/8591"}],"wp:attachment":[{"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/media?parent=8579"}],"wp:term":[{"taxonomy":"ht_kb_category","embeddable":true,"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/ht-kb-category?post=8579"},{"taxonomy":"ht_kb_tag","embeddable":true,"href":"https:\/\/support.buildsoft.eu\/es\/wp-json\/wp\/v2\/ht-kb-tag?post=8579"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}