The ConCrete Suite consists of 3 software platforms: ConCrete, ConCrete Plus and ConCrete List.

• ConCrete is the perfect software to quickly calculate continuous concrete beams.
• ConCrete Plus generates the reinforcement drawings.
• ConCrete List generates the cutting list and summaries.

✓ 30 sec Unique Input Method

ConCrete has a unique and interactive question-answer system for entering the model geometry, the cross-sections and the loads. Via the input panel, ConCrete asks the user for the data. After entering, ConCrete immediately raises the next question. The questions always appear in the same order.

Regular Concrete users know that order by heart and can enter, as it were, blindfolded, beams within 20 to 30 seconds. Your productivity is therefore particularly high with a tool like ConCrete.

✓ Auto-calculation

After finishing the last question, ConCrete will automatically generate the load combinations according to Eurocode and execute the analysis. ConCrete instantly provides you with deformations (considering the effects of cracking and creep), internal forces, reinforcement requirements, … and presents all of this in clear graphs.

ConCrete shows a minimal and optimal height, allowing you to pursue an optimal design from the start.

ConCrete will update all analysis results upon the change of any design parameter and create a design analysis report.

✓ Auto-draw of Reinforcement

ConCrete Plus automatically translates the theoretical reinforcement requirements into a practical reinforcement drawings. All reinforcement parameters are user-definable bar diameter, number of bars per layer, elimination priority, …

You can automatically create cutting lists in ConCrete List from the ConCrete Plus reinforcement drawings.

Each of the programs are connected to one-another:

• ConCrete Plus and ConCrete List always require input from ConCrete or Diamonds.
• ConCrete can be used seperately from the others.

ConCrete

ConCrete analyzes and designs continuous beams in reinforced concrete.

Input: (from scratch) by user or ConCrete Plus element

ConCrete Plus

ConCrete Plus creates automatically the reinforcement drawings for beams calculated with ConCrete or Diamonds.

Input: ConCrete or Diamonds elements

ConCrete List

ConCrete List generates the cutting list and summaries for beams from ConCrete Plus.

Input: ConCrete Plus elements